Click here to print this page

Aquablend Thermostatic Mixing Valves provide safety and reliability in domestic and commercial applications

Hot water temperature control is an important safety issue for homes, hotels, hospitals and other health care facilities. If exposed to heated water above 60 degrees Celsius, it can take as little as 1 second for a child to receive third degree burns and require hospitalisation.

With this issue in mind, Aquablend thermostatic mixing valves (TMVs)  deliver the world’s highest standard of quality and are certified to AS/NZS4032.1 2005 allowing for compliance with AS/NZS 3500 for heated water temperature control.

The Aquablend high performance valves are the only thermostatic mixing valves designed and manufactured in Australia. Aquablend safely delivers to plus or minus 2 degrees Celsius under varying temperature and pressure conditions. Safety from scalding and shock is ensured by the thermal shut-off capability in the event of cold or hot water supply failure.

Mr Tim Fisher of Enware Australia Pty Ltd, says that the Aquablend valves are essential where young children, elderly or disabled people use the showers, baths, basins and sinks.

“Aquablend is the best way to protect against scald injuries and provides superior temperature stability for warm water delivery,” says Mr Fisher. “Available in four different models for applications ranging from domestic to commercial use, the health and aged care preferred models [Aquablend 1500 and Aquablend 2000] also have NSW Health approval for use in public and private healthcare facilities.”

Aquablend TMV’s are capable of multi-point heated water delivery, catering for more than one shower, wash basin and bath. They are supplied with a combination isolating ball valve, non return valve and strainer assemblies which incorporate water pressure and temperature test ports.

Four different models of Aquablend TMVs are available:

  • Aquablend TMV 1000: temperature ranges from 38 degrees to 50 degrees Celsius. This model has a static inlet pressure of 1000 kPa, a dynamic inlet pressure of 10 kPa – 500 kPa, a flow rate of 39 lpm.
  • Aquablend TMV 1500: temperature rangers from 35 degrees to 48 degrees Celsius, with a flow rate of 42 lpm, a static inlet pressure of 1000 kPa, and dynamic inlet pressure of 20kPa- 500kPa.
  • Aquablend TMV 2000: temperature ranges from 35 degrees to 50 degrees Celsius. This model has a static inlet pressure of 1000 kPa, a dynamic inlet pressure of 10 kPa – 500 kPa, a flow rate of 40 lpm.
  • Aquablend TMV 2500: temperature rangers from 35 degrees to 50 degrees Celsius, with a flow rate of 75 lpm, a static inlet pressure of 1000 kPa, and dynamic inlet pressure of 10kPa- 500kPa.

“Aquablend TMV’s are also easy to install and maintain,” says Mr Fisher. “The optional stainless steel enclosures, allow for ease of access and service. The compact component assembly design provides low-cost, in-situ service capability with minimal downtime.

“Flat faced connections allow the removal of the valve without disturbing the pipe work. Each product is supplied with a detailed technical manual to facilitate valve sizing, installation, commissioning, maintenance and trouble-shooting.”

Enware also provides the Smart Flow TMV Monitoring System as a risk management tool for the performance and maintenance of Aquablend TMVs. The networked system constantly monitors the Aquablend electronically, through a calibrated temperature probe installed into the TMV. It provides engineering personnel with a constant temperature readout and performance status report of all TMVs throughout the facility.

FOR MORE INFORMATION, please contact Enware Australia Pty Ltd, 9-11 Endeavour Road, Caringbah NSW 2229, Australia, Ph (61-2) 9525 9511, fax (61-2) 9525 9536. Click here to email your query to us.