Aquablend eSQX Touch Free - Active Sense Point of Use Thermostatic Wall Mixer with 230mm Spout
Aquablend eSQX is Australia's first and most technically advanced touch free point of use thermostatic mixer solution delivering touch free controlled temperature heated water. Beneath outlet infra-red sensor activation is designed for general hand hygiene within health care and food preparation facilities.
Designed for effective reduction of Legionella risk. Features flush cycles and smooth bore spout design. The point of use TMV also minimises warm water legs and is AS4032.1 WaterMark certified.
Adjustable temperature range for user comfort. AHFG Type A and B healthcare basin compatibility. Smart, durable easy-clean chrome surfaces and sealed face plate minimises egress of moisture into wall cavity and contaminated air flow from wall cavity into sterile areas.
Smooth bore tubular spout designed to minimise bacteria growth
12-hour flush cycle eliminates stagnation in water supply lines greatly reducing the risk of bacteria growth
Potentially contaminated air is elminated from the water stream with laminar flow controlled spout
Low voltage 6V battery operated or 12V mains supply
Back and front of wall components are separate order codes and can be supplied separately to meet construction needs
Face plate removes to access integral isolation/check valves, strainers and inspection ports for TMV servicing requirements
20 - 500 kPa (For optimum operation it is recommended that the hot and cold water supply pressures be balanced within +/- 10%)
Static Inlet Pressures
Maximum 1000kPa For testing purposes/system commissioning
Hot Temperature Supply Range
Cold Temperature Supply Range
Minimum Temperature Differential (between hot supply and the outlet temperature)
Adjustable Thermostatic Temperature Range*
35-46 C (+/-2)
Minimum Flow Rate
* Enware products are to be installed in accordance with the Plumbing Code of Australia and AS/NZS3500.
NOTE: Enware Australia advises: 1. Due to ongoing Research and Development, specifications may change without notice. 2. Component specifications may change on some export models.