• BUB391.jpg

Spring Action Bubbler Basin / Sink Top Assembly

Designed to suit basin bodies conforming to AS1718, this product eliminates the need to manually shut off the tap, by closing immediately the action is released. The user must hold the tap on to maintain water flow. The product should only be used with pre-mixed (thermostatically) warm water to the hot tap. There can be no control over mixed water temperature as is normally achieved in a standard mixing tap, as the spring action mechanism is either fully on or off.

Key features

  • Vandal resistant design
  • Self-closing mechanism
  • DR Brass construction
  • Products

    Order code Spring Action Bubbler Basin / Sink Top Assembly
  • Minimum-Maximum Working Pressure (AS/NZS 3500)* 30-500kPa
    Maximum Static Pressure 1200kPa Max*
    Maximum Working Temperature** 85 C
    * Enware products are to be installed in accordance with the Plumbing Code of Australia and AS/NZS3500. NOTE: Enware Australia advises: 1. Due to ongoing Research and Development, specifications may change without notice. 2. Component specifications may change on some export models.
  • BUB391 Line Drawing
  • Document type File type
    Brochure B Self Closing - Product Guide
    Installation guide pdf pdf pdf
    PDF Dimensional Drawings BUB391
Email Us