Food Service: Pre-Rinse Wall Exposed Mixer Assembly
Food Service: Pre-Rinse Wall Exposed Mixer Assembly
Product Code: FWS031
Couldn't load pickup availability
Product description
The Enware Ultra Rinse range of Food Service Pre-Rinse assemblies are designed for use in Commercial Kitchens and Food Preparation areas. A wide range of products to suit Wall and Bench mounting are available with mixers, pot fillers and various formats to suit different plumbing set-outs. Heavy duty fixings and chrome plated finishes with anti-vandal fittings ensure easy cleaning for improved hygiene, and long lasting service for critical areas in the kitchen. Adjustable sets for easy retro-fit and special shortened assemblies ensure there is a solution for all new and existing kitchens. Service parts such as hoses, trigger sprays, spindles and handles are available to ensure downtime does not interrupt the work flow of a busy kitchen.
Key Selling Points
- Separate exposed hot and cold taps to provide either hot, cold water or mixed water
- Dual check valves for backflow protection
- Spring return allows the spray and hose to be pulled into the spraying position and to retract back from the washing area when released
- Pex hose with smooth outer covering and braided inner has in-built swivels to ensure ease of use and to assist to prevent user fatigue
- Quarter-turn, contra-rotating easy to clean 80mm lever handles
- Heavy duty Jumper Valve 1/4 Turn spindles, can be serviced
- Clear identification on all lever handles with blue, yellow, red or grey coloured indicator collars
- Adjustable inlet centres for easy retro-fit
- Attractive, lead free brass chrome body
- Modular design allows tailoring for individual needs
- Pot Filler FS063 and spout can be added
- Standard WELS (Stars)
- 6
- Standard WELS Flow Rate (L/min)
- 4
- WELS Category
- Tapware
- Certifications
- WMKA1583 - LF,WELS-6 Star-4Lpm,Lead Free
- Maximum Recommended Temperature (Deg C)
- 70
- Maximum Static Pressure (kPa)
- 800
- Minimum Recommended Pressure (kPa)
- 100
- Maximum Recommended Pressure (kPa)
- 500
- Inlet Connection
- 15mm (1/2" BSP)
- Valve Type
- 1/4 Turn Jumper Valve
BIM Files
Brochures
Dimensional Drawings
Product Information
